For Light to Medium Traffic Loads
The Viscous Elastic Paving Jointing Mortar
ROMPOX® Flex-Joint is viscous elastic jointing mortar made of select sands and rubber and is suitable for vehicular rated and unbonded surfaces. ROMPOX® Flex-Joint Water is water permeable, self compacting and water emulsifiable during installation. Suitable for medium to heavy traffic up to 25 T.
- Vehicle loading up to 25 T
- Ideal for unbonded construction
- For Joint Widths from 8 mm (3/8")
- Self compacting
- Pressure washer safe
- Highly water permeable
- Used in combination with ISATec® displacement protection system
ROMEX Flex Joint InstallationWatch our ROMEX Certified Installer rejuvenate this driveway by installing ROMEX Flex Joint between the pavers. Due to it's flexible properties, our Flex Joint product is the perfect, permeable solution when creating a long lasting, low maintenance surface. Check out the video and see just how easy it is!
Open the bucket, open bottles within and pour the contents slowly and completely into the filler material component. Rinse both bottles with 100ml of water, close, shake well and add to mix.
2. Add Water
Add 2.5L of water and begin mixing process. Total mixing time: at least 6 minutes. Use professional agitator or rotary-drum mixer / compulsory mixer.
Intensely pre-wet surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.
Apply the mixed pavement jointing mortar onto the pre-wetted surface by pouring out in three or four spots to optimise flow capacity. Work carefully into the joints using a squeegee/rubber slider, ensuring it passes deep into the joints and fills them completely.
5. Sweep Off
After approx. 10 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping.
6. Final Cleaning
Finally, use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.