For DIY & Commercial Use
The All-in-One Solution for Coatings & Waterproofing
- 2-in-1 Primer & Coating System
- Suitable for Concrete, Wood, Metal
- For Dry and Damp Surfaces
- Vertical & Horizontal Application
- UV Resistant
- Extremely Durable for High Traffic & Heavy Vehicles
- Protects Surface from Fuel or Other Chemicals
Pour component B completely into component A. Prevent air from being mixed in by using a slow rotating mixer.
Mix for 3 minutes.
After mixing, pour into a clean container and stir again.
4. Further Mixing
Add 10% water and mix for a further 2 minutes.
5. First Sealing
Distribute material over the surface by flooding with a one lip rubber squeegee or use a fur roller to distribute evenly. Use a fur roller to roll again crosswise
Note: Sealed surfaces outdoors should be protected against rain for approx. 24 hours.
6. Second Sealing
After 24 hours, distribute material over the surface by flooding with a one lip rubber squeegee or use a fur roller to distribute evenly. Then use a fur roller to roll again crosswise.
Note: Insufficient ventilation can lead to differences in degree of shine and colour. On magnesite and anhydrite screeds as well as surfaces with heavier loads, then two layers of sealant are applied. Material mixed the previous day cannot be used the following day.