Fast Curing for Heavy Commercial Traffic Loads
The First Synthetic Resin Pavement Jointing Mortar that Works Below 0 °C
ROMPOX® - W1000 is synthetic resin jointing mortar that can be installed at negative temperatures as it will successfully cure up to -5 °C. ROMPOX® - W1000 is resistant to street cleaning vehicles, allows for the quick re-opening to traffic and is ideal for public spaces and commercial yards. The compound has a high strength rating and is suitable for 8mm (3/8”) wide joints on all natural stone and concrete surfaces. Resistant to ants, weeds, frost, de-icing salt and is pressure washer safe.

- For traffic loads up to 25 T
- For joint widths from 3 ⁄8” | 8 mm
- Water permeable
- Can be installed up to -5 °C
- Resistant to street cleaning vehicles
- Ideal for winter construction projects
- Allows for quick re-opening to traffic










1. Pre-Wet
Lightly pre-wet the surface before you begin. Do not let water accumulate in the joints and avoid the use of too much water.

2. Mixing
Pour the 55lb filler material & ROMPOX® - W1000 resin component into a clean, sufficiently large bucket. Mix for 6 minutes total. DO NOT ADD WATER!

3. Pour On
Pour the mixed jointing mortar on to the pre-wetted surface.

4. Work In
Work the jointing mortar into the joints using a broom or rubber squeegee, ensuring it passes deep into the joints and fills them completely.

5. Cleaning
Sweep the stone surface immediately after application with a coarse street broom. Use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not reuse swept off material.