Skip to content

ROMPOX® – PURE | PATIO

Resin film free jointing mortar suitable for residential pathways & patios.

ROMPOX® – PURE | PATIO is a 1-component resin jointing mortar that hardens/cures with air/oxygen after application and was specifically developed for the jointing of sensitive surfaces and coated concrete stone slabs. The jointed stone surface is almost resin film free, which maintains the natural colour of the stone. ROMPOX® – PURE | PATIO is suitable for use on patios and on surfaces around the house with light, occasional vehicle loads (on settling-free, water permeable bed). This permeable and pressure washer safe jointing mortar can be used on almost all natural stone, porcelain, concrete and clinker surfaces.

Note – ROMPOX® JOINTING SAND NP can also be used without D7000 JOINT STRENGTHENER & SURFACE SEALER.

Rompox-PURE-01-1024x1024
For Pedestrian Loads
For Joint Widths from 5 mm (1/4")
Quick Resin Film Free
Highly Water Permeable
Easy to Mix/Apply
Suitable for Coated & Sensitive Stone Surfaces
Ideal for Residential Patios & Pathways
2-Comp-1024x331

FEATURES

WATCH THE ROMPOX PURE INSTALL VIDEO

EASY HOW-TO-APPLY INSTRUCTIONS

rompox-easy-pre-wet

1. Pre-Wet

Lightly pre-wet the surface before you begin. Do not let water accumulate in the joints and avoid the use of too much water.

rompox-profi-easy-mixing

2. Mixing

Pour the 55lb filler material & Pure Patio resin component into a clean, sufficiently large bucket. Mix for 6 minutes total. DO NOT ADD WATER!

rompox-easy-pour-on

3. Pour On

Pour the mixed jointing mortar on to the pre-wetted surface.

 

rompox-easy-wash-in-1

4. Work In

Work the jointing mortar into the joints using a broom or rubber squeegee, ensuring it passes deep into the joints and fills them completely.

rompox-profi-easy-final-cleaning

5. Final Cleaning

Use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.

LEARN MORE

ROMPOX® – PURE | PATIO

Resin film free jointing mortar suitable for residential pathways & patios.

ROMPOX® – PURE | PATIO is a 1-component resin jointing mortar that hardens/cures with air/oxygen after application and was specifically developed for the jointing of sensitive surfaces and coated concrete stone slabs. The jointed stone surface is almost resin film free, which maintains the natural colour of the stone. ROMPOX® – PURE | PATIO is suitable for use on patios and on surfaces around the house with light, occasional vehicle loads (on settling-free, water permeable bed). This permeable and pressure washer safe jointing mortar can be used on almost all natural stone, porcelain, concrete and clinker surfaces.

Note – ROMPOX® JOINTING SAND NP can also be used without D7000 JOINT STRENGTHENER & SURFACE SEALER.

Rompox-PURE-01-1024x1024
For Pedestrian Loads
For Joint Widths from 5 mm (1/4")
Quick Resin Film Free
Highly Water Permeable
Easy to Mix/Apply
Suitable for Coated & Sensitive Stone Surfaces
Ideal for Residential Patios & Pathways
2-Comp-1024x331

FEATURES

WATCH THE ROMPOX PURE INSTALL VIDEO

EASY HOW-TO-APPLY INSTRUCTIONS

rompox-easy-pre-wet

1. Pre-Wet

Lightly pre-wet the surface before you begin. Do not let water accumulate in the joints and avoid the use of too much water.

rompox-profi-easy-mixing

2. Mixing

Pour the 55lb filler material & Pure Patio resin component into a clean, sufficiently large bucket. Mix for 6 minutes total. DO NOT ADD WATER!

rompox-easy-pour-on

3. Pour On

Pour the mixed jointing mortar on to the pre-wetted surface.

 

rompox-easy-wash-in-1

4. Work In

Work the jointing mortar into the joints using a broom or rubber squeegee, ensuring it passes deep into the joints and fills them completely.

rompox-profi-easy-final-cleaning

5. Final Cleaning

Use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.

LEARN MORE